V4 Wood Flooring : Alpine A104 Upland Oak Rustic Brushed & Oiled (14/3 x 150mm)

Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.

Pipe Covers are Dowel Fit – Centre 17mm

Pipe Covers are available in pairs only.

Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.

Consumption:  10m2

Set to light foot traffic:  After approx. 12 hours

Complete hardening: Approx 24 hours

For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option N) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option O) – Walnut

For use with walnut flooring.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option Q) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option I) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile).  Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option D) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.

Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option K) – Walnut

For use with walnut flooring.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option C) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option R) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.

Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour match to your flooring will automatically be provided.

Specification:  H: 17mm x W: 17mm    length:    2.5m

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option J) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option A) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm