Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
You may also like...
-
Hardwood Twin / T-Bar Profile 1000mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Deco Parquet Herringbone ZB107 Unfinished Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
Price on Application -
Hardwood Semi Ramp Profile 1000mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Alpine A103 Brushed Oak Brushed & Matt Lacquered (14/3 x 150mm)
Area covered per pack: 1.71m2
Mirroring the proportions of a traditional floor board this plank suits a domestic interior whilst being versatile and easy to install. The rustic oak surface is lightly brushed to remove the soft grain, leaving a hard wearing and tactile hardwood surface. 6 coats of natural matt lacquer protect the surface whilst maintaining the natural oak tone. The resulting floor is easy to maintain and extremely resistant to everyday wear and scratching, ideal our modern lifestyles.
Price on Application -
Hardwood Ramp Profile 2000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 1000mm (Option A)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
Hardwood Square Edge / End Profile 2000mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Ramp Profile 1000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Semi Ramp Profile 2000m
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring: Deco Plank UN102 Wharf Grey Brushed & Colour Oiled (15/4 x 190mm)
Area covered per pack: 2.166m2
Rich textured surfaces inspired by cityscapes reclaimed by nature. The surface of this board is rolled with steel brushes which emphasise the natural grain of the oak surface. The Wharf Grey top layer is given a deep lustre with the application of several colour oils which are UV cured to build up a natural protective surface.
Price on Application -
V4 Wood Flooring : Deco Parquet Herringbone ZB108 Natural Oak Oiled Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB108 Natural Oak is smooth planed and simply finished with coats of grain enriching natural oil. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns.
Also available in a matching plank, Deco Plank A112.
Price on Application -
V4 Wood Flooring: Deco DC105 Silver Haze, Colour Stained & Hardwax Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Deco Silver Haze flooring beautifully crafted coloured floors created from an oak top layer which is lightly brushed to release the natural grain. Wood lye is then applied to bleach and colour the floors to create the deep lustred and distinctive oak tones and grain variations found in the collection.
Price on Application
