Price on Application
Get QuoteArea covered per pack: 2.06m2
Tundra Smoked Oak flooring is milled with or without a bevel edge and creates precision geometry across large or small spaces with a hard wearing oiled surface making it the ideal choice for commercial and residential spaces.
| Manufacturer | |
|---|---|
| Product Code | |
| Flooring Type | |
| Flooring Thickness | |
| Wear layer | |
| Flooring Width | |
| Flooring Length | |
| Floor Style | |
| Species | |
| Colour | |
| Surface | |
| Flooring Finish | |
| Edge Detail | |
| Profile | |
| Installation | |
| Pack Size | |
| Suitable for Underfloor Heating | |
| Manufacturer Guarantee |
Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option K) – Walnut
For use with walnut flooring.
Wood’s Good EcoGold underlay
A rubber crumb underlay developed for use with laminate and wood flooring, made from recycled
rubber tyres. Excellent impact sound insulation and laid rubber side down the foil is an excellent DPM.
Underfloor Heating: Suitable
Tog Rating: 0.800
Sound Reduction: 23db
Wood Flooring. Moisture Protection. Sound Reduction. Compression Recovery. Hard Wearing.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 3.5mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour match to your flooring will automatically be provided.
Specification: H: 17mm x W: 17mm length: 2.5m
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option R) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option P) – Walnut
For use with walnut flooring.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option D) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option T) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option N) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option M) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option I) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option J) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option Q) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option L) – Walnut
For use with walnut flooring.
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option S) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Area covered per pack: 0.5m2
The light honey tones of Harrow Oak flooring work perfectly in any room in the house. The rustic grade shows nature at its finest with knots and natural imperfections clearly visible. The parquet blocks can be laid in a number of different patterns to suit your individual style.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 1.68m2
With its rich, dark coffee tones Sloane Smoked Oak flooring will add luxury and style to any room. The smoking process that the boards go through means that the colour seeps deeper into the plank keeping them looking better for longer.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 0.5m2
The strong grey tones in this floor will add a statement to any room. If you want to perfect the industrail look with a traditional edge the Epsom Oak is perfect.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 0.5m2
The beautiful white tones of Eton Oak flooring will add a light and clean feel to any room. The rustic grade enhances the natural charters of oak and gives the floor a slight coastal feel.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 0.5m2
The grain pattern in the Dulwich Oak flooring is highlighted beautifully to create a truly stunning floor that will be a feature of any room. It can be laid in a number of different patterns for the perfect look. Pair with Brora Oak, they’re a perfect match.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 0.65m2
With rich, warm honey colours throughout the floor, the Dorchester Oak flooring certainly channels the luxurious feel of classic herringbone floors and is a perfect combination to colour rich and sophisticated interiors.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 0.5m2
Westminster Oak flooring the distinctive warmth and natural beauty of the toffee shade along with the parquet style will give a truly traditional look. Lay the planks in a herringbone or double herringbone for a truly vintage feel.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 1.68m2
The neutral shade of Kensington Oak flooring will make a statement in any room! Mix and match different shades or play with the layout for a look as unique as your home.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 1.584m2
This exquisite natures own engineered herringbone cathedral oak flooring comes with a 5mm wear layer and a hand scraped, brushed, smoked and white UV lacquered finish creating a stunningly beautiful appearance. Suitable for use with underfloor heating with tongue and groove fitting.
Area covered per pack: 1.68m2
Eltham Walnut flooring is a designer’s dream. The deep tones of Walnut make this floor a unique and eccentric choice.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 0.5m2
The light shade of Winchester Oak flooring is an ideal choice for large and small rooms alike. The blocks allow for a range of designs to be created to suit the size of the space.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
