Price on Application
Get QuoteArea covered per pack: 2.888m2
A series of 6 steel brushes are applied to remove the soft grain from the top layer the rustic hardwood surface whilst sympathetically following the natural contours of the wide section of oak. The wear layer is then spray coated with coats of durable matt lacquer. The resulting plank is both wonderfully tactile and ultimately hardwearing, the rich, textured surface deflecting everyday wear and scratches. Also available in matching Herringbone.
| Manufacturer | |
|---|---|
| Product Code | |
| Flooring Type | |
| Flooring Thickness | |
| Wear layer | |
| Flooring Width | |
| Flooring Length | |
| Floor Style | |
| Species | |
| Colour | |
| Surface | |
| Flooring Finish | |
| Edge Detail | |
| Profile | |
| Installation | |
| Pack Size | |
| Suitable for Underfloor Heating | |
| Manufacturer Guarantee |
Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour match to your flooring will automatically be provided.
Specification: H: 17mm x W: 17mm length: 2.5m
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option I) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option L) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option K) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option R) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option M) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option P) – Walnut
For use with walnut flooring.
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option J) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option Q) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option S) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option D) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option T) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option N) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Wood’s Good EcoGold underlay
A rubber crumb underlay developed for use with laminate and wood flooring, made from recycled
rubber tyres. Excellent impact sound insulation and laid rubber side down the foil is an excellent DPM.
Underfloor Heating: Suitable
Tog Rating: 0.800
Sound Reduction: 23db
Wood Flooring. Moisture Protection. Sound Reduction. Compression Recovery. Hard Wearing.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 3.5mm
Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour match to your flooring will automatically be provided.
Specification: H: 17mm x W: 17mm length: 2.5m
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option I) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option L) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option K) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option R) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg
Area covered per pack: 1.66m2
Furlong Flooring Next Step 189 (6514) – Coffee Brushed single strip engineered flooring is supplied in random lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 1.936m2
Furlong Flooring Mont Blanc (8577) – Oak Natural Brushed single strip engineered oak natural flooring is supplied in 2200mm lengths with 1 split plank per pack and a bevelled profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 2.812m2
Majestic 189 Clic ivory white single strip Furlong flooring is supplied in 1860mm lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with matt lacquer creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a clic system and a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential guarantee.
Area covered per pack: 1.66m2
Furlong Flooring Next Step 189 (6513) – Nutmeg Brushed single strip engineered flooring is supplied in random lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 1.936m2
Furlong Flooring Mont Blanc (8582) – Antique Brushed single strip engineered flooring is supplied in 2200mm lengths with 1 split plank per pack and a bevelled profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 2.202m2
Furlong Flooring Emerald 148 (11157) – Smoke Stain Brushed single strip engineered flooring is supplied in 1860mm lengths with 2 split planks per pack and a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating abeautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential guarantee.
Area covered per pack: 2.2m2
A thick top layer of subtly textured rustic European oak is soaked in a Golden brown hue created with penetrating coats of UV hardened natural colour oils. The 5mm rustic oak top layer is rolled with steel brushes to take away the softer grain whilst following the contours of the natural grain, the result is an enhanced surface texture which becomes tactile underfoot and extremely durable to everyday scratches. The brushed surface is further enhanced and protected by UV cured coats of Danish Colour oil.
Area covered per pack: 1.71m2
Mirroring the proportions of a traditional floor board this plank suits a domestic interior whilst being versatile and easy to install. The rustic oak surface is lightly brushed to remove the soft grain, leaving a hard wearing and tactile hardwood surface. 6 coats of natural matt lacquer protect the surface whilst maintaining the natural oak tone. The resulting floor is easy to maintain and extremely resistant to everyday wear and scratching, ideal our modern lifestyles.
Area covered per pack: 2.166m2
Rich textured surfaces inspired by cityscapes reclaimed by nature. The surface of this board is rolled with steel brushes which emphasise the natural grain of the oak surface. The Wharf Grey top layer is given a deep lustre with the application of several colour oils which are UV cured to build up a natural protective surface.
Area covered per pack: 2.202m2
Furlong Flooring Emerald 148 (11154) – Oak Rustic Brushed single strip engineered oak flooring is supplied in 1860mm lengths with 2 split planks per pack and a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential guarantee.
Area covered per pack: 2.2m2
Rich coats of durable clear lacquer varnish create a soft satin sheen that makes this charming rustic oak plank shine. It’s thick European oak top layer is backed with durable hardwood multi-ply giving the finished floor the look and feel of a traditional solid wood installation.
Area covered per pack: 1.66m2
Furlong Flooring Next Step 189 (6512) – Oak Rustic Brushed single strip engineered oak flooring is supplied in random lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 1.66m2
Furlong Flooring Next Step 189 (6514) – Coffee Brushed single strip engineered flooring is supplied in random lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 1.936m2
Furlong Flooring Mont Blanc (8577) – Oak Natural Brushed single strip engineered oak natural flooring is supplied in 2200mm lengths with 1 split plank per pack and a bevelled profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 2.812m2
Majestic 189 Clic ivory white single strip Furlong flooring is supplied in 1860mm lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with matt lacquer creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a clic system and a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential guarantee.
Area covered per pack: 1.66m2
Furlong Flooring Next Step 189 (6513) – Nutmeg Brushed single strip engineered flooring is supplied in random lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 1.936m2
Furlong Flooring Mont Blanc (8582) – Antique Brushed single strip engineered flooring is supplied in 2200mm lengths with 1 split plank per pack and a bevelled profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
Area covered per pack: 2.202m2
Furlong Flooring Emerald 148 (11157) – Smoke Stain Brushed single strip engineered flooring is supplied in 1860mm lengths with 2 split planks per pack and a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating abeautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential guarantee.
Area covered per pack: 2.2m2
A thick top layer of subtly textured rustic European oak is soaked in a Golden brown hue created with penetrating coats of UV hardened natural colour oils. The 5mm rustic oak top layer is rolled with steel brushes to take away the softer grain whilst following the contours of the natural grain, the result is an enhanced surface texture which becomes tactile underfoot and extremely durable to everyday scratches. The brushed surface is further enhanced and protected by UV cured coats of Danish Colour oil.
Area covered per pack: 1.71m2
Mirroring the proportions of a traditional floor board this plank suits a domestic interior whilst being versatile and easy to install. The rustic oak surface is lightly brushed to remove the soft grain, leaving a hard wearing and tactile hardwood surface. 6 coats of natural matt lacquer protect the surface whilst maintaining the natural oak tone. The resulting floor is easy to maintain and extremely resistant to everyday wear and scratching, ideal our modern lifestyles.
Area covered per pack: 2.166m2
Rich textured surfaces inspired by cityscapes reclaimed by nature. The surface of this board is rolled with steel brushes which emphasise the natural grain of the oak surface. The Wharf Grey top layer is given a deep lustre with the application of several colour oils which are UV cured to build up a natural protective surface.
Area covered per pack: 2.202m2
Furlong Flooring Emerald 148 (11154) – Oak Rustic Brushed single strip engineered oak flooring is supplied in 1860mm lengths with 2 split planks per pack and a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential guarantee.
Area covered per pack: 2.2m2
Rich coats of durable clear lacquer varnish create a soft satin sheen that makes this charming rustic oak plank shine. It’s thick European oak top layer is backed with durable hardwood multi-ply giving the finished floor the look and feel of a traditional solid wood installation.
Area covered per pack: 1.66m2
Furlong Flooring Next Step 189 (6512) – Oak Rustic Brushed single strip engineered oak flooring is supplied in random lengths with a micro bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 20 year residential guarantee.
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
