V4 Wood Flooring : Deco Parquet Herringbone ZB101 Frozen Umber Brushed & Colour Oiled Rustic Oak (14/3 x 90mm)

For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).

TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg

Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.

Consumption:  10m2

Set to light foot traffic:  After approx. 12 hours

Complete hardening: Approx 24 hours

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option O) – Walnut

For use with walnut flooring.

Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.

Pipe Covers are Dowel Fit – Centre 17mm

Pipe Covers are available in pairs only.

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option A) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option J) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option R) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.

Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile).  Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option M) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option K) – Walnut

For use with walnut flooring.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option L) – Walnut

For use with walnut flooring.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option Q) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

TimberMax UFH VapourStop

For use with underfloor heating. Includes a Damp Proof Membrane.

Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.

Underfloor Heating:  Excellent

Tog Rating:  0.303

Sound Reduction:  19db

Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.

Specification:     Size: 1m x 10m (10m2 coverage)

Thickness:  2mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option B) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.