Price on Application
Get QuoteArea covered per pack: 2.53m2
Chevron Natural Oak flooring is a modern take on the classic French herringbone. Precision engineering allows this parquet floor to be installed on any suitable subfloor. The durable oak top layer is finished with a hard wearing wax oil which gives the surface a unique natural glow. Backed on a flexible tongue and grooved soft wood base the total thickness is just 9mm making this floor ideal for under floor heating.
| Manufacturer | |
|---|---|
| Product Code | |
| Flooring Type | |
| Flooring Thickness | |
| Wear layer | |
| Flooring Width | |
| Flooring Length | |
| Floor Style | |
| Species | |
| Colour | |
| Surface | |
| Flooring Finish | |
| Edge Detail | |
| Profile | Left & Right Tongue & Groove (45 Degree Angled Header Joint) |
| Installation | |
| Pack Size | |
| Suitable for Underfloor Heating | |
| Manufacturer Guarantee |
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option J) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option D) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option R) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg
Wood’s Good EcoGold underlay
A rubber crumb underlay developed for use with laminate and wood flooring, made from recycled
rubber tyres. Excellent impact sound insulation and laid rubber side down the foil is an excellent DPM.
Underfloor Heating: Suitable
Tog Rating: 0.800
Sound Reduction: 23db
Wood Flooring. Moisture Protection. Sound Reduction. Compression Recovery. Hard Wearing.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 3.5mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option P) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option Q) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option T) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option I) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option K) – Walnut
For use with walnut flooring.
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option S) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour match to your flooring will automatically be provided.
Specification: H: 17mm x W: 17mm length: 2.5m
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option M) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option L) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option N) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option J) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option D) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for interlocking with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option R) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg
Wood’s Good EcoGold underlay
A rubber crumb underlay developed for use with laminate and wood flooring, made from recycled
rubber tyres. Excellent impact sound insulation and laid rubber side down the foil is an excellent DPM.
Underfloor Heating: Suitable
Tog Rating: 0.800
Sound Reduction: 23db
Wood Flooring. Moisture Protection. Sound Reduction. Compression Recovery. Hard Wearing.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 3.5mm
Area covered per pack: 1.44m2
ZB101 Frozen Umber has a thick European rustic oak surface which is brushed and textured so that subtle grey colour oils settle in the grain of this bevel edged, engineered herringbone wood flooring. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns. Also available in a matching plank, Deco Plank DC101.
Please Note: Frozen Umber has been updated for 2022 with a new UV cure oil surface which makes even more durable. The boards now have a slightly darker shade.
Area covered per pack: 0.65m2
The select grade and natural colour of Siwa Oak flooring makes it the most classic in the range and is ideal in any interior as a beautiful, natural base with the focus on the geometric pattern of the herringbone format
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 0.65m2
With rich, warm honey colours throughout the floor, the Dorchester Oak flooring certainly channels the luxurious feel of classic herringbone floors and is a perfect combination to colour rich and sophisticated interiors.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
Area covered per pack: 1.28m2
Herringbone Old English Furlong flooring is supplied in 400mm lengths with a bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential warranty.
Area covered per pack: 1.28m2
Herringbone Scorched Oak Furlong flooring is supplied in 400mm lengths with a bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential warranty.
Area covered per pack: 1.44m2
ZB102 Nordic Beach has a thick European rustic oak surface which is brushed and textured so that white oil settles in the grain of this bevel edged, engineered herringbone wood flooring. This results in a golden oak floor with white grain that creates a mixture of sunshine and cool nordic vibes. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns.
Also available in a matching plank, Deco Plank DC104.
Area covered per pack: 1.584m2
This exquisite natures own engineered herringbone cathedral oak flooring comes with a 5mm wear layer and a hand scraped, brushed, smoked and white UV lacquered finish creating a stunningly beautiful appearance. Suitable for use with underfloor heating with tongue and groove fitting.
Area covered per pack: 1.68m2
Hampstead Oak flooring hints at the current trend for grey flooring whilst allowing the more natural tones of oak to show. The classic parquet design sits perfectly with both a more traditional and modern decor.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 1.68m2
The neutral shade of Kensington Oak flooring will make a statement in any room! Mix and match different shades or play with the layout for a look as unique as your home.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 1.28m2
Herringbone Scandic White Furlong flooring is supplied in 400mm lengths with a bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential warranty.
Area covered per pack: 0.5m2
Rugby Oak flooring is a classic shade that will enhance any room. It mixes well with all the other shades in the range to create a room that is truly unique.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 1.44m2
ZB101 Frozen Umber has a thick European rustic oak surface which is brushed and textured so that subtle grey colour oils settle in the grain of this bevel edged, engineered herringbone wood flooring. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns. Also available in a matching plank, Deco Plank DC101.
Please Note: Frozen Umber has been updated for 2022 with a new UV cure oil surface which makes even more durable. The boards now have a slightly darker shade.
Area covered per pack: 0.65m2
The select grade and natural colour of Siwa Oak flooring makes it the most classic in the range and is ideal in any interior as a beautiful, natural base with the focus on the geometric pattern of the herringbone format
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 0.65m2
With rich, warm honey colours throughout the floor, the Dorchester Oak flooring certainly channels the luxurious feel of classic herringbone floors and is a perfect combination to colour rich and sophisticated interiors.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
Area covered per pack: 1.28m2
Herringbone Old English Furlong flooring is supplied in 400mm lengths with a bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential warranty.
Area covered per pack: 1.28m2
Herringbone Scorched Oak Furlong flooring is supplied in 400mm lengths with a bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential warranty.
Area covered per pack: 1.44m2
ZB102 Nordic Beach has a thick European rustic oak surface which is brushed and textured so that white oil settles in the grain of this bevel edged, engineered herringbone wood flooring. This results in a golden oak floor with white grain that creates a mixture of sunshine and cool nordic vibes. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns.
Also available in a matching plank, Deco Plank DC104.
Area covered per pack: 1.584m2
This exquisite natures own engineered herringbone cathedral oak flooring comes with a 5mm wear layer and a hand scraped, brushed, smoked and white UV lacquered finish creating a stunningly beautiful appearance. Suitable for use with underfloor heating with tongue and groove fitting.
Area covered per pack: 1.68m2
Hampstead Oak flooring hints at the current trend for grey flooring whilst allowing the more natural tones of oak to show. The classic parquet design sits perfectly with both a more traditional and modern decor.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 1.68m2
The neutral shade of Kensington Oak flooring will make a statement in any room! Mix and match different shades or play with the layout for a look as unique as your home.
Select grade is likely to contain some boards that have a higher number of knots than Prime, and you should also expect some of these knots to be larger in size. There is a possibility of some sapwood and small cracks and filler are likely to be present. A greater level of colour variation in the timber is to be expected.
Area covered per pack: 1.28m2
Herringbone Scandic White Furlong flooring is supplied in 400mm lengths with a bevel profile on all 4 sides to give a consistent joint finish. Each length comes brushed and pre-finished with uv oil creating a beautiful palate of natural colours. Suitable for underfloor heating, quick and easy installation with a factory finish meaning no sanding and no mess. The product also comes with a 15 year residential warranty.
Area covered per pack: 0.5m2
Rugby Oak flooring is a classic shade that will enhance any room. It mixes well with all the other shades in the range to create a room that is truly unique.
Rustic grade has the potential to include all characteristics across the majority of boards with knots appearing in varying sizes as well as many levels of natural colour variation in the timber to be expected. A varying amount of sapwood is possible, checks that are likely to be present will be filled in a colour to complement the natural look of the timber.
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
