V4 Wood Flooring : Alpine A104 Upland Oak Rustic Brushed & Oiled (14/3 x 150mm)

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option K) – Walnut

For use with walnut flooring.

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option J) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

A colour and height match to your flooring will automatically be provided.

2 Heights available:   15mm  or  18mm

Wood’s Good EcoGold underlay

A rubber crumb underlay developed for use with laminate and wood flooring, made from recycled

rubber tyres. Excellent impact sound insulation and laid rubber side down the foil is an excellent DPM.

Underfloor Heating:  Suitable

Tog Rating: 0.800

Sound Reduction:  23db

 Wood Flooring. Moisture Protection. Sound Reduction. Compression Recovery. Hard Wearing.

Specification:     Size: 1m x 10m (10m2 coverage)

Thickness:  3.5mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed to lip over the edge of flooring to allow expansion.                           

(Option P) – Walnut

For use with walnut flooring.

One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).

TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option B) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.

TimberMax UFH VapourStop

For use with underfloor heating. Includes a Damp Proof Membrane.

Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.

Underfloor Heating:  Excellent

Tog Rating:  0.303

Sound Reduction:  19db

Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.

Specification:     Size: 1m x 10m (10m2 coverage)

Thickness:  2mm

Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

Provides a natural solid wood finish on stair cases.

Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

(Option A) – Available Unfinished or with a Lacquered Finish.

Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.