Brooks Floor: American Black Walnut W1005 American Black Walnut Matt Lacquered (15/3 x 152mm)

For a perfect finish End Section profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option B) – To match floors:  Cognac / Walnut / Dark Stain & Smoked

A colour and finish match to your flooring will automatically be provided.

See (Option A) for:  Natural Oak version

Specification:   19mm  x  40mm x 990mm

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height between the two floors is greater than that met by  using a Semi Ramp profile).

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option B) – To match floors:  Cognac / Walnut / Dark Stain & Smoked

A colour and finish match to your flooring will automatically be provided.

See (Option A) for:  Natural Oak version.

Specification:   21mm  x  62mm x 990mm

• The underfloor heating underlay – QuickTherm’s unique perforated design and ultra low tog value of just 0.35 means your underfloor heating system works more efficiently to keep you toasty!
• Lifelong supporter – the very dense closed cell polyethylene material can take heavy loads long-term, fully supporting your floor to protect it and keep it in good shape for a longer life.
• Light fantastic – it may be no lightweight in performance, but QuickTherm’s certainly easy and safe to lift and handle thanks to its ultra-lightweight foam.

Being dust free means QuickTherm is cleaner and easier to install, with less clearing up needed afterwards.

The PE foam is very eco-friendly, being 100% recyclable – so in the long run it’s better for the planet as well as your home!

Benefits

• Underfloor Heating
• Hard Wearing

Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

A colour and finish match to your flooring will automatically be provided.

Specification:

H: 19mm x W: 19mm

Length:  3m

Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option A) – To match all Natural Oak Floors.

A colour and finish match to your flooring will automatically be provided.

See (Option B) for:  Cognac / Walnut / Dark Stain & Smoked versions.

Specification:   16mm  x  50mm x 990mm

Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile).

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option A) – To match all Natural Oak Floors.

A colour and finish match to your flooring will automatically be provided.

See (Option B) for:  Cognac / Walnut / Dark Stain & Smoked versions.

Specification:   21mm  x  55mm x 3000mm

Heavyweight natural rubber underlay with outstanding noise reduction

• The sound of silence… – Timbertech Acoustic Plus has an exceptional impact sound insulation level of 27dB – really bringing down noise levels in the room and making it a better place to be.
• Protects against moisture – The gold vapour barrier stops your floor covering being damaged by moisture rising up from the sub-floor.
• Heavyweight champ –  The heavy mass stability of Timbertech Acoustic Plus means your floor’s always fully supported, reducing the wear and tear to it, whatever a pounding it takes.

     Best for

• Cushioning
• Moisture Protection
• Sound Reduction
• Level Floors
• Commercial Use

Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile).

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option A) – To match all Natural Oak Floors.

A colour and finish match to your flooring will automatically be provided.

See (Option B) for:  Cognac / Walnut / Dark Stain & Smoked versions.

Specification:   21mm  x  55mm x 990mm

Top quality acoustic underlay with 3mm thick natural rubber

• All the stability you need – The high density, fleece-backed natural rubber is extremely stable and prevents movement in your flooring, reducing wear and tear.
• Shhh! Underlay at work – This is an underlay with real acoustic performance thanks to its thick materials, cutting down noise levels to make any room more comfortable.
• Dry as a bone –  Don’t worry about moisture rising up from the sub-floor – the silver vapour barrier film protects your floor covering against damp.

     Best for

• Moisture Protection
• Sound Reduction
• Compression Recovery
• Underfloor Heating
• Hard Wearing

Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

A colour and finish match to your flooring will automatically be provided.

Specification:

H: 19mm x W: 19mm

Length:  3m

Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option B) – To match floors: Cognac / Walnut / Dark Stain & Smoked

A colour and finish match to your flooring will automatically be provided.

See (Option A) for:  Natural Oak version

Specification:   16mm  x  50mm x 3000mm

• • • Dry as a bone – Barrier Plus has a vapour barrier on both sides and a double overlap, so you’re even better protected against rising moisture to keep your room bone dry.
  • • Impact protection – perfect support not only feels good under your feet, but protects your floor against excess wear and even high impact damage.
  • • Lightening the load – the lightweight material makes it a breeze to lift and move around…saving time and effort during installation.

  The advanced moisture barrier gives this underlay even better resistance to fungi, mould and bacteria.

  Dust-free installation means Barrier Plus is cleaner and easier to work with…and there’s less clearing up afterwards.

  The 100% recyclable polyethylene foam makes this underlay very eco-friendly and kinder to the environment.

  .

Benefits

• Cushioning
• Moisture Protection

For a perfect finish End Section profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option A) – To match all Natural Oak Floors.

A colour and finish match to your flooring will automatically be provided.

See (Option B) for:  Cognac / Walnut / Dark Stain & Smoked versions.

Specification:   19mm  x  40mm x 990mm

Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile).

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option B) – To match floors:  Cognac / Walnut / Dark Stain & Smoked

A colour and finish match to your flooring will automatically be provided.

See (Option A) for:  Natural Oak version

Specification:   21mm  x  55mm x 990mm

Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height between the two floors is greater than that met by  using a Semi Ramp profile).

Available in a selection of colours matched to all the Brooks Floor flooring product ranges.

Includes plastic strip for a perfect fitting.

(Option A) – To match all Natural Oak Floors.

A colour and finish match to your flooring will automatically be provided.

See (Option B) for:  Cognac / Walnut / Dark Stain & Smoked versions.

Specification:   21mm  x  62mm x 990mm